Watch Back Removing Tools, Spring Bar Removal Tool, watch back press and Spring Bars (Watch Pins) for Watch Straps from Watch Battery (UK)

Watch Battery(UK) offers a range of watch tools and accessories to help you change your watch battery and your watch strap so that your watch will look new again. We have watch back removing tools to enable you to remove the back from watches with screw back watch cases and watch backs that prise off too. We offer a couple of watch tool kits that will help you service your watch and other people's watches too. We also have a selection of spring bars (sometimes referred to as watch pins) to go with your new watch strap.. See our Battery Help and FAQs for more information on replacing the battery in your watch

Whitby Pocket Hand Warmer This chrome-plated hand-warmer, developed by outdoor specialists Whitby & Co., will run for 12 hours or more. The hand-warmer uses a unique flameless catalytic warmer - powered by lighter fuel to provide safe, easy to use and portable heat anywhere you go. Available with a comfortable, protective fleece bag, the Hand Warmer is ideal where cold hands are a problem, sitting in your front room, pottering in the garden or enjoying the great outdoors – from mountaineering and hill walking, to fishing and golfing. Material: metal with chrome plating Weight: 80g Dimensions: 10.3cm x 7cm x 1.5cm Flameless catalytic warmer Protective fleece bag included Filling cup provided 6 or 12 hours burn time Requires lighter fluid (not supplied) Replaceable burner (sold separately) Two year warranty against failure due to materials or workmanship Price: £15.00 (UK Delivery from 99p, click for details.) Quantity   View Basket/Checkout Click on image to enlarge.

Whitby Replacement Burner Whitby Hand Warmer Replacement Burner This replacement burner for the Whitby Hand Warmer will also fit the Zippo version. Replace your burner after about 90 lightings. Price: £4.99 (UK Delivery from 99p, click for details.) Quantity   View Basket/Checkout Click on image to enlarge.

Plastic Tweezers Handy plastic tweezers for holding watch batteries without getting grease or dirt from your fingers on the battery. Price: £1.50 (UK Delivery from 99p, click for details.) Quantity   View Basket/Checkout Click on image to enlarge.

Ansmann Clamshell design Battery Case Ansmann Clamshell design Battery Case that will hold a combination of 4 AA or AAA batteries. Batteries shown are not included Price: £1.50 (UK Delivery from 99p, click for details.) Quantity   View Basket/Checkout Click on image to enlarge.

Ansmann Battery Storage Box A handy and robust transparent battery and digital media storage box which can hold AA, AAA and CR123 batteries as well as digital media. The boxes can be clipped together for transportation as a single unit. Dimensions - 160mm (W) x 55mm (H) x 22mm (D) Price: £2.50 (UK Delivery from 99p, click for details.) Quantity   View Basket/Checkout Click on image to enlarge. Customers buying this product also bought:- Ansmann AA 2500mAh MaxE batteries

Keyring Screwdriver A handy screw driver to keep with your keys. Useful for tightening those awkward little screws in glasses. Blade size 1.6mm. Price: £2.99 (UK Delivery from 99p, click for details.) Quantity   View Basket/Checkout Click on image to enlarge.

Folding Pocket Magnifying Glass A handy 10x folding pocket magnifying glass. Useful for all types of close up hobby work. Viewing area diameter of 1.5cm Diameter of magnifying glass 2.5cm Price: £3.99 (UK Delivery from 99p, click for details.) Quantity   View Basket/Checkout Click on image to enlarge.

Spring Bar Removal Tool Used for removing the spring bars holding the watch strap into the watch shoulders. With leather or plastic straps, the forked end can be used to compress the spring bar, allowing the watch strap to be removed and replaced. Alternatively, for metal watch straps, where the end of the spring bar can be seen from the outside of the watch shoulder, the fine point at the other end of the tool can be used to remove spring bars. In Addition, the same end can also be used to push out the pins in metal bracelet watch straps. Price: £3.99 (UK Delivery from 99p, click for details.) Quantity   View Basket/Checkout Click on image to enlarge.

Watch Back Opener - Snap Back Watch back remover for snap on watch cases. Most watch cases can be easily opened in order to change the watch battery, by inserting the blade of this handy tool between the case and the back plate and twisting to snap open the case. Look for a slight raised lip, often positioned close to where the strap attaches to the watch. If the back of your watch has 6 slots arranged around the perimeter of the case then you need to use the Screw Back Watch Back Removing Tool. Price: £3.99 (UK Delivery from 99p, click for details.) Quantity   View Basket/Checkout Click on image to enlarge. Customers buying this product also bought:- Pack of 10 of the top 5 most popular watch batteries

Dust Pump A rubber blower with valve for clearing dust and swarf from watches and other delicate instruments. Price: £4.99 (UK Delivery from 99p, click for details.) Quantity   View Basket/Checkout Click on image to enlarge.

Magnifying Eye-piece (Loupe) This 15x eye-piece magnifying glass can be screwed apart to give a lower magnification of 10x. Useful for all types of close up hobby work. Unscrews into two separate magnifying glasses; smaller part with viewing area diameter of 1.3cm and magnification of 10x. Larger part with viewing area diameter of 2.1cm and magnification of 5x. Price: £4.99 (UK Delivery from 99p, click for details.) Quantity   View Basket/Checkout Click on image to enlarge.

Anchor flat blade screw-driver set of 9 Set of 9 Anchor Watch Maker's Screw Drivers, ranging in size from 2.00mm - 0.50mm, with revolving tops. Supplied in a black plastic case. Price: £5.99 (UK Delivery from 99p, click for details.) Quantity   View Basket/Checkout Click on image to enlarge.

ZRC Bracelet Link Removal Tool A handy bracelet link removal tool from ZRC. A robust pocket sized tool for removing the bracelet pins on metal watch bands so you can easily shorten bracelets to fit. Push out the pins on the link(s) that can be removed and once shortened the bracelet links can be re-attached in the same way. Overall length is 11cm and the tip of the shaft that enters the bracelet is 4mm long with a diameter of 1mm or less. Handy tip: If possible, always take a link off each side of the bracelet clasp so that it always remains in the centre of your wrist when worn. Much cheaper than getting your local jeweler to do it! See also the Anchor Bracelet Pin Removal Pliers. for an alternative bracelet pin removal tool for more regular use. Price: £6.99 (UK Delivery from 99p, click for details.) Quantity   View Basket/Checkout Click on image to enlarge.

Jaxa Type Watch Case Holder Jaxa Type Watch Case Holder and vice is essential for holding your watch case and mechanism whilst you can work on it with both hands free. Avoid injuries when using a blade to remove snap on watch backs by having the watch firmly held in place by this handy vice. The body is made from aluminium and the plastic stops can be adjusted to fit the size and shape of watch. The case holder is approximately 4.5cm at the longest dimension. Price: £6.99 (UK Delivery from 99p, click for details.) Quantity   View Basket/Checkout Click on image to enlarge.

Watch Back Removing Tool - Screw Back Watch back remover for screw back watch cases. An adjustable tool which will allow you to remove watch backs from those watches with screw type backs so that you can access the compartment in order to change the watch battery. Screw down watch backs tend to have 6 slots arranged around the perimeter of the case. Use this tool on the two opposing slots to grip and turn anticlockwise to remove the back of the watch. Will fit opposing slots up to 42mm apart. Price: £6.99 (UK Delivery from 99p, click for details.) Quantity   View Basket/Checkout Click on image to enlarge. Customers buying this product also bought:- Pack of 10 of the top 5 most popular watch batteries

Jaxa Type Watch Back Remover Waterproof Watch Case Back Opener Jaxa Type. The Jaxa case opener comes with 4 sets of different types of pins for different case styles. The maximum distance between pins is 32mm. Keys included : (Round ) ( Flat ) ( Square ) ( Toothed ) The knurled handle provides a non-slip, secure grip. Please note this wrench will not open Rolex watches Price: £9.99 (UK Delivery from 99p, click for details.) Quantity   View Basket/Checkout Click on image to enlarge. Customers buying this product also bought:- Pack of 10 of the top 5 most popular watch batteries

Anchor Back Press (Small) The Anchor Jig is a small, light weight press for fitting watch crystals and the backs of snap-on watch cases. Supplied complete with 8 dies sizes 14mm, 15mm, 18mm, 19mm, 24mm, 30mm, 31mm and 37mm. Please note that the dies supplied have flat faces with no indents. Care should be taken to protect the watch glass with a wad of soft material when pressing watch backs into place. Price: £14.99 (UK Delivery from 99p, click for details.) Quantity   View Basket/Checkout Click on image to enlarge. Customers buying this product also bought:- Pack of 10 of the top 5 most popular watch batteries

Watch Refurbishment Kit - 1 Our watch refurbishment kit contains essential tools for removing the backs of watches and also their straps or bracelets. Got watches lurking in the drawer? Change the battery put a new strap on them, and hey presto, a brand new watch! Included are the watch back removal tools for watches with screw backs or push backs, a spring bar removal tool and a handy 15 times magnification eye-glass so that you can see in detail what you are doing. Check which battery you might need by comparing the number on your old battery with those in our Watch Battery Cross Reference Table. Separately these items come to £19.96. Save nearly £2 when buying them in our handy pack. Price: £17.99 (UK Delivery from 99p, click for details.) Quantity   View Basket/Checkout Click on image to enlarge. Customers buying this product also bought:- Anchor flat blade screw-driver set of 9 Pack of 10 of top 5 most popular watch batteries

Anchor Bracelet Link Removal Pliers Bracelet Link Removal Pliers are a must if you need to adjust the bracelets of watches on a regular basis. This handy tool allows you to easily and precisely push out the retaining pins on watch bracelets so that you can alter their length. Comes with handy soft faux leather storage pouch, instructions and spare pin. Can accommodate bracelet widths up to 1.5 inches. Price: £17.99 (UK Delivery from 99p, click for details.) Quantity   View Basket/Checkout Click on image to enlarge.

Watch Refurbishment Kit - 2 This watch refurbishment kit can add to our starter kit above. This kit comprises a small jig for replacing those awkward push type watch backs, a fine screwdriver set for those fiddly screws, tweezers for holding delicate parts and a dust pump for getting rid of all the muck clogging up the mechanism. Sold separately for £27.47, buy this pack and save £3.48 Check which battery you might need by comparing the number on your old battery with those in our Watch Battery Cross Reference Table. Price: £23.99 (UK Delivery from 99p, click for details.) Quantity   View Basket/Checkout Click on image to enlarge. Customers buying this product also bought:- Pack of 10 of the top 5 most popular watch batteries Pack of 10 of 5 popular watch batteries

Watch Back Press (Large) The Hand Jig is a back press for fitting watch crystals and the backs of snap-on watch cases. A larger and heavier jig than the Anchor back press shown above, this model is more suitable for frequent use. Supplied complete with 8 dies; 4 single sided, sizes 14mm, 20mm, 25mm and 30mm, and 4 double sided dies, sizes 20 x22mm, 24x26mm, 28x30mm and 31x32mm. Price: £32.95 (UK Delivery from 99p, click for details.) Quantity   View Basket/Checkout Click on image to enlarge. Customers buying this product also bought:- Pack of 10 of the top 5 most popular watch batteries Pack of 10 of 5 most popular watch batteries

1.2mm Diameter Straight Spring Bars (Pair) lengths 20, 25, 30mm Straight Spring loaded watch pin. Select length below. These spring bars are 1.2mm in diameter and come in 3 different Watch Spring Bar lengths; 20mm, 25mm and 30mm. The length of the spring bar selected should match the measurement of the gap between the shoulders of the watch. This is most often the width of the watch strap. So if your strap is 20mm in width and fits snugly between your watch's shoulders then the spring bar length to select is 20mm. Price: £1.25 (UK Delivery from 99p, click for details.) Select Size 20mm 25mm 30mm Quantity   View Basket/Checkout Click on image to enlarge.

1.5mm Diameter Straight Spring Bars (Pair) lengths 08 - 22mm Straight Spring loaded watch pin. Select length below. The length of the spring bar selected should match the measurement of the gap between the shoulders of the watch. This is most often the width of the watch strap. So if your strap is 20mm in width and fits snugly in your watch then the spring bar length to select is 20mm. Price: £1.25 (UK Delivery from 99p, click for details.) Select Size 8mm 9mm 10mm 11mm 12mm 13mm 14mm 15mm 16mm 17mm 18mm 19mm 20mm 21mm 22mm Quantity   View Basket/Checkout Click on image to enlarge.

1.5mm Diameter Curved Spring Bars (Pair) lengths 16 - 22mm Curved spring bars for straps that need to fit around a curved shoulder on the watch. Price: £1.50 (UK Delivery from 99p, click for details.) Select Size 16mm 17mm 18mm 19mm 20mm 21mm 22mm Quantity   View Basket/Checkout Click on image to enlarge.

1.8mm Diameter Straight Spring Bars (Pair) lengths 08 - 28mm Straight Spring loaded watch pin. Select length below. The length of the spring bar selected should match the measurement of the gap between the shoulders of the watch. This is most often the width of the watch strap. So if your strap is 20mm in width and fits snugly in your watch then the spring bar length to select is 20mm. Price: £1.25 (UK Delivery from 99p, click for details.) Select Size 8mm 9mm 10mm 11mm 12mm 13mm 14mm 15mm 16mm 17mm 18mm 19mm 20mm 21mm 22mm 24mm 25mm 26mm 28mm Quantity   View Basket/Checkout Click on image to enlarge.

1.8mm Diameter Curved Spring Bars (Pair) lengths 16 - 22mm Curved spring bars for straps that need to fit around a curved shoulder on the watch. Price: £1.50 (UK Delivery from 99p, click for details.) Select Size 16mm 17mm 18mm 19mm 20mm 21mm 22mm Quantity   View Basket/Checkout Click on image to enlarge.

1.8mm Diameter EXPANDABLE Straight Spring Bars (Pair) lengths 12 - 15mm One size straight spring-loaded watch pins to fit strap sizes between 12 and 15mm. The length of the spring bar selected should match the measurement of the gap between the shoulders of the watch. This is most often the width of the watch strap. So if your strap is 20mm in width and fits snugly between your watch's shoulders then the spring bar length to select is 20mm. Expandable spring bars lengths should not exceed the gap measured between the watch shoulders. Price: £1.50 (UK Delivery from 99p, click for details.) Quantity   View Basket/Checkout Click on image to enlarge.

1.8mm Diameter EXPANDABLE Straight Spring Bars (Pair) lengths 10 - 14mm One size straight spring-loaded watch pins to fit strap sizes between 10 and 14mm. The length of the spring bar selected should match the measurement of the gap between the shoulders of the watch. This is most often the width of the watch strap. So if your strap is 20mm in width and fits snugly between your watch's shoulders then the spring bar length to select is 20mm. Expandable spring bars lengths should not exceed the gap measured between the watch shoulders. Price: £1.50 (UK Delivery from 99p, click for details.) Quantity   View Basket/Checkout Click on image to enlarge.

1.8mm Diameter EXPANDABLE Straight Spring Bars (Pair) lengths 14 - 19mm One size straight spring-loaded watch pins to fit strap sizes between 14 and 19mm. The length of the spring bar selected should match the measurement of the gap between the shoulders of the watch. This is most often the width of the watch strap. So if your strap is 20mm in width and fits snugly between your watch's shoulders then the spring bar length to select is 20mm. Expandable spring bars lengths should not exceed the gap measured between the watch shoulders. Price: £1.50 (UK Delivery from 99p, click for details.) Quantity   View Basket/Checkout Click on image to enlarge.

1.8mm Diameter EXPANDABLE Straight Spring Bars (Pair) lengths 17 - 24mm One size straight spring-loaded watch pins to fit strap sizes between 17 and 24mm. The length of the spring bar selected should match the measurement of the gap between the shoulders of the watch. This is most often the width of the watch strap. So if your strap is 20mm in width and fits snugly between your watch's shoulders then the spring bar length to select is 20mm. Expandable spring bars lengths should not exceed the gap measured between the watch shoulders. Price: £1.50 (UK Delivery from 99p, click for details.) Quantity   View Basket/Checkout Click on image to enlarge.

---

This page or any part of this web site should not be copied without permission.
© WatchBattery 2011