Replacement watch strap straight spring bar sets from WatchBattery (UK) Ltd
Most watches use straight spring bars to hold the watch strap to the watch head and to fasten the buckle to the watch strap. If your spring bars are damaged or lost then they can be easily replaced.
To determine the correct size simply measure the distance between the lugs on the watch head. This will give you the correct spring bar length, but if you are in any doubt then choose one of our Expandable Spring Bars as these will fit a range of sizes.
The thickenss of the spring bar is most likely to be 1.8mm but some watch straps or watch bracelets require a thinner spring bar, in which case a 1.5mm or 1.2mm diameter spring bars might be required. In most cases a 1.5mm diameter would be suitable.